Publicidad
Idiomas disponibles
Idiomas disponibles
Common questions and functioning guide
Problem
Lack of energy
Very low voltage (this can be observed due
The refrigerator
to variations of bulbs lightning at your
is not
home)
functioning
Faulty socket
Non-connected plug
Electric power supply cable damaged
Installation in an inadequate place
Inadequate leveling of product
Abnormal noises
Accessories wrongly placed
Installation in an inadequate place
Airflow vents obstructed
Lack of cooling
Door opening longer than recommended
Inadequate control adjustment
Direct heat or sunlight sources
External
Environmental high humidity (above
condensation
75%RH)
Door is not correctly closed
External
condensation
near the
Lack of adherence of the magnetic seal
magnetic seal
against the cabinet
Door opening longer than recommended
Food not wrapped, uncovered or hot , as
well as containers without lid storing
Internal
liquids, thus generating excessive
condensation
humidity
Lack of adherence of the magnetic seal
against the cabinet
High
High humidity in food stored inside the
humidity inside the
vegetable drawer
vegetable drawer
Ice making on
interior
Humidity filtration by the door
walls of the
freezer
Internal bulb
Bulb fused
does not light
Possible cause
What to do ?
- Verify the fuse of the electric power supply
- Verify the electric power supply
- Make sure the plug makes good
contact with the socket
Install an automatic regulator of voltage
with minimum power of 500
watts and one minimum current of 10
amperes
Connect other appliance to this outlet to
verify it and change the socket if necessary
Connect the plug
Call an authorized Service Center
See installation instructions
Adjust leveling screws
Place them according to the instructions
See installation instructions
Clear air flow vents
Open doors just as necessary
See operation and use
See installation instructions
If environmental humidity is above 75%RH
this is normal.
Check there are not objects obstructing
the door closing.
Adjust the leveling screws to slope the
product slightly backwards
Open doors just as necessary
Wrap food and cover containers that sto re
liquids, do not introduce hot food.
Adjust the leveling screws to slope the
product slightly backwards
Adjust humidity controls to a more open
position
Check there are no objects obstructing the
door closing, if necessary, reorganize food
in the freezer, if ice making persists call the
Authorized Service Center
Change the bulb
43
Publicidad
