Publicidad
Idiomas disponibles
Idiomas disponibles
CARE AND MAINTENANCE
1.Turn off the appliance
2.Release the attachment with the rubber wiper blades and remove it from the suction
head. Then, release the suction head.
3.Clean the suction head and the attachment with rubber wiper blades under running
water. Do not wash in dishwater.
Caution: The basic appliance contains electrical components. Do not clean this under
running water.
4.Remove the tank. Rotate the lock and pull out.
5.Empty the tank and rinse with clear water. Close the tank again.
6.Pull the micro-fibre pad off the spray bottle and dean under running water. The micro-fi-
bre pad can be deaned in a washing machine but do not use fabric softener.
7.Let the appliance dry before charging the battery, and storing in a dry place.
TROUBLESHOOTING
Spray bottle is not working
Refill the detergent.
If pump mechanism in spray bottle is defective, contact dealer.
Failure to start
Check the charge/operating display.
No signal or a slow blinking signal, charge the battery.
If light is rapidly blinking, return to supplier.
Not cleaning properly
Clean the rubber wiper blades.
Reverse the used rubber wiper blades.
Pull the blades out of the housing. Moisten with water or detergent.
Reverse the rubber blades and reinstall
Replace the rubber wiper blades once worn out.
If water is leaking from suction head, empty the water tank.
WARNING
Do not open the battery as it may cause an electrical short or release.
Do not expose the battery directly to heat, fire or sunlight.
10
Publicidad
