Adjusting the wind direction indi-
cation
The rotor/vane-unit has been set so
that the meter indicates North when
the vane is in line with the tube of the
rotor/vane- unit.
If the rotor/vane-unit is mounted at
an angle to the North-South direction
then rotate the knurled portion of the
rotor/vane- barrel until the meter indi-
cates North when the vane is point-
ing the North.
N.B. Do not rotate the knurled por-
tion further than 180 degrees from its original
setting. If you need to go further than 180
degrees, reverse the process by going back
through zero.
22
10.0305
WSR160