STEP 3
x 6
x 6
x 6
x 1
1. W o o d
2. C a m B o l t
3. C a m
11. C a m
D o w e l
C o v e r
finished edge
NOT TO SCALE. REFER TO PAGE 3 FOR ACTUAL SIZE HARDWARE.
1. Carefully tap small wooden dowels into place. Leave 1/2" of the dowels sticking out.
2. Screw-In cam bolts must be screwed down flush.
3. Refer to page 4 for instructions on how to use the cam lock system.
4. Place cover over visible hole
8