Publicidad
Idiomas disponibles
Idiomas disponibles
UNPACKING AND INSPECTION CONTINUED
WARNING: DO NOT operate this product if damaged during shipment, handling or misuse.
Do not operate the product until the parts have been replaced or the fault rectified. Failure to do
so may result in serious personal injury or property damage. All damaged parts must be repaired
or replaced as needed prior to operating this product. Check to see that all nuts, bolts and fittings
are secure before putting this product into service.
If you have any questions, or require assistance with damaged or missing parts, please contact
our customer service department at 1-800-497-0552. Please have the serial number, model
number, and date of purchase available for reference when calling.
SAFETY INFORMATION
• Operate in a safe work environment. Keep your work area clean, well-lit and free of
distractions. Place lights so you are not working in a shadow.
• Keep anyone not wearing the appropriate safety equipment away from the work area.
• Never engage in horseplay with the tool. Respect the tool as a working implement.
• Always wear impact safety goggles that provide front and side protection for the eyes. Eye
protection equipment should comply with CSA Z94.3-07 or ANSI Z87.1 standards based on
the type of work performed.
• Wear gloves that provide protection based on the work materials or to reduce the effects of
tool vibration.
• Wear protective clothing designed for the work environment and tool.
• Non-skid footwear is recommended to maintain footing and balance in the work environment
• Wear steel toe footwear or steel toe caps to prevent a foot injury from falling objects.
SPECIFIC SAFETY INFORMATION
WARNING: DO NOT let comfort or familiarity with product (gained from repeated use) replace
strict adherence to the tool safety rules. If you use this tool unsafely or incorrectly, you can suffer
serious personal injury.
• Use the correct tool for the job. This tool was designed for a specific function. Do not modify
or alter this tool or use it for an unintended purpose.
• Do not use the tool if any parts are damage broken or misplaced. Repair or replace the parts.
• Escaping fluid under pressure may have sufficient force to penetrate the skin.
• Always check for leaks wearing a face shield or safety goggles.
• Do not use your hands to detect a leak. Use a piece of cardboard or paper and watch for
discoloration to find a fluid leak.
OPERATION
For detailed and concise instructions on the correct use of this kit, refer to the vehicle
manufacturer's owner's guide.
1. Carefully undo and remove the radiator cap. Use a damp cloth with gloves, arm and face
protection if the radiator cap is known to be hot.
2. Select the correct adaptor and configuration of the stationary seat accessories and ensure it
is securely fitted to the filler neck of the radiator or expansion tank.
3. Attach the 'push-fit' connector onto the male tailpiece of the adaptor fitted to the radiator.
4. Pump the hand pump handle and check the reading on the pressure gauge. Ideal readings
should range between 12 to 15 PSI (Check your vehicle's manufacturer's workshop manual),
if the pressure level is below the range, a leak in the radiator or hose is the source of the
problem.
3
Publicidad
