Stiga ETR 900J Manual De Instrucciones página 14

Before using your power tool read carefully the manual instructions
1. P
RESENTATION
Dear Customer,
Thank you for choosing one of our products. We
are sure you will be satisfied by it and that it will
fully meet your requirements. This manual has
been written to allow you to become familiar with
your machine and use it safely and efficiently;
please do not forget that it is an integral part of the
machine, keep it to hand so that you can consult it
at any time and, if you decide to sell or lend it to
other people, make sure it stays with the machine.
Your new machine has been designed and built in
compliance with current legislation and is safe and
reliable if used according to the contents of this
manual (foreseen use); any other use or failure to
observe the safety instructions concerning use,
maintenance and repair is considered as "improper
use" and invalidates the warranty, releases the
Manufacturer from all liability, and transfers to the
user all costs deriving from damage or injury to
him/herself or to other people. If you find slight dif-
ferences between the descriptions in the manual
and the machine in your possession, please bear
in mind that, as the product is continually im-
proved, the information contained in this manual is
subject to change without notice or the need to
update the manual as long as the essential safety
and operating characteristics remain unchanged.
Please contact your dealer if you have any doubts.
We trust you will make the most of this machine!
2. T
ECHNICAL DATA
Model
Voltage
Power frequency
Electrical engine
no load speed
Cutting width
Weigth
LpA (Sounding pressure)*
LWA (Sounding power)
Vibration level:
front handle
rear handle
* to ears of operator
Model
Voltage
Power frequency
Electrical engine
no load speed
Cutting width
Weigth
LpA (Sounding pressure)*
LWA (Sounding power)
Vibration level:
front handle
rear handle
* to ears of operator
02_inglese.p65
3. S
The following symbols are used in this manual or
are indicated on the machine. Before read it they
must be known.
Danger of flying objects! No-one must remain within
a radius of 15 metres while the machine is working.
Keep all people not involved in the job at a dis-
tance.
ETR 750
V 230
Hz 50
rpm 7500
cm 370
Kg 5,2
dB(A) 81,4
dB(A) 96
Never use metal tools.
m/s 2 1,65
m/s 2 0,94
ETR 900J
V 230
Hz 50
rpm 7500
cm 370
Kg 5,6
dB(A) 83,1
dB(A) 96
m/s 2 2,15
m/s 2 1,44
13
ETR 750 - ETR 900J
YMBOLS
Denotes risk of personal injury, loss of
life or damage to the tool in case of
non observance of the instruction in this
manual.
Read the instructions manual before
using this machine.
Use always: safety helmet, noise-damp-
ing earplugs, protective gagglers or vi-
sor.
Do not expose to rain.
Only use heads with a nylon cord.
Do not use circular saw blades.
The machine is double insulated (Class
II) which makes an earth connection
unnecessary.
Acoustic power level LWA, pursuant to
directive 2000/14/EC.
Remove plug from the mains immedi-
ately if cable is damaged or cut.
Discarded electrical appliances contain
recyclable materials and should there-
fore not be disposed of along with
household waste.
09/01/2006, 17.00
13