Trevi XCD 5770 USB Manual De Uso Y Conexiones página 13

ENGLISH
USB INPUT
1. Insert a USB device / MP3 player into the USB input (5).
2. Playback will start automatically and the track number will be shown on the display.
3. For the playback functions, refer to the chapter "CD OPERATION".
NOTE: The XCD 5770 USB car stereo may not support some external devices with a USB port, this is due to the incompatibility of
the processors.
INPUT AUX IN
1. Press the MODE key (18) in sequence to move to the AUX source.
2. Connect any unit with audio output to the AUX input (17).
3. Command the outdoor unit from its commands.
BLUETOOTH (HANDS-FREE MODE)
You can make calls from your mobile phone in HANDS-FREE mode (in free mode) thanks to compatibility with the inter-
national Bluetooth wireless system.
- When making a call, speak loud and clear.
- To have an optimal condition before making or receiving a call, close the car windows.
- The voice can be reproduced in a distorted way if there are problems with the telephone field.
- Use of the HANDS-FREE function depends on the partial / total compatibility of the mobile phone.
- Make sure that the Bluetooth connection is available on your mobile phone.
CONNECTION
1. Press the MODE key (18) in sequence to switch to the BT source and activate the Bluetooth function of the mobile
phone. Search for accessories / audio devices.
2. From the mobile phone select the CAR KIT device that corresponds to the car radio.
3. If required, enter the 4-digit code "0000".
4. Now the connection is established, the word LINKED will appear on the car radio display.
RECEIVING / REJECTING / TERMINATION OF A CALL
1. When you receive a call, listening to the playback source will stop and you will hear the ringing sound.
2. Press the button (19) to start the conversation or press the button (18) to reject it.
- The audio of the conversation will be audible from the car's audio system.
- During the call the car radio functions will be interrupted.
3. Press the button (18) to end the conversation.
- At the end of the conversation, listening to the source being played will automatically be resumed from where it was
interrupted.
NUMBER DIALING PER CALL
1. In Bluetooth mode, press the button (19), the display shows "-" flashing.
Enter the telephone number to call using the number keys (16) keeping in mind that:
- The key (10) if pressed once corresponds to the number 1, if pressed for a long time corresponds to 6.
- The key (11) if pressed once corresponds to the number 2, if pressed for a long time corresponds to 7.
- The key (12) if pressed once corresponds to the number 3, if pressed for a long time corresponds to the 8.
- The key (13) if pressed once corresponds to the number 4, if pressed for a long time corresponds to 9.
- The key (14) if pressed once corresponds to the number 5, if pressed for a long time corresponds to 0.
2. Press the button (19) to start the call.
3. Press the button (18) to end the conversation.
AUTOMATIC ON
1. When the radio is switched off in stand-by mode, if a call is received from the paired Bluetooth device, the car radio will
automatically switch on in order to use the HANDS-FREE function.
2. At the end of the call the car radio will automatically go back to stand-by mode.
AUDIO FILE REPRODUCTION
Through the Bluetooth connection it is possible to play the audio files in the mobile phone.
Note: the car stereo only plays audio files with A2DP compatible mobile phones.
Consult the manual of your mobile phone.
13
XCD 5770 USB