Publicidad
Idiomas disponibles
Idiomas disponibles
TECHNICAL DATA
Drive profile: Internal square
Drive profile size: 6.3 mm (1/4")
Output profile: External square
Output profile size: 6.3 mm (1/4")
Torque range: 6 - 30 Nm
Resolution: 0.1
Accuracy: ± 4 %
Size: 125 x 35 x 40 mm
Weight: 0.35 kg
Memory capacity: 50 data sets
Operation modes: Peak & Trace
Unit selection: Kg-cm, Ib-in, Ib-ft, N-m
Battery: 1.5V AAA (x2)
Operation temperature: -10°C ~ 60°C (13.9°F ~ 139.9°F)
Storage temperature: -20°C ~ 70°C (-4°F ~ 157.9°F)
Operation humidity: 15% ~ 90%
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.
FEATURES
•
2 LEDs red / green for visual alerting
•
Standard functions: torque setting, measurement setting, mode setting
•
Operation in both clockwise and counter-clockwise directions
•
LCD display shows kg/cm, lb-in, lb-ft, N/m
•
Audible torque confirmation by means of buzzer
•
Easy to set up Peak or Trace modes
•
Auto shut off after 80 seconds, when not in used.
WARNING
•
The torque adapter is designed exclusively for manual use, never use it in connection with a
machine.
•
Please use the torque wrench in a clean and dry place only.
•
Do not use organic solvents to clean the torque wrench.
•
Clean the torque wrench and LCD panel with a soft dry cloth only.
•
Do not allow children to play with this tool or its packaging.
•
Do not use the tool if parts are missing or damaged.
•
Do not immerse the torque wrench in any liquids.
•
Remove the batteries, when the torque wrench is not use for a longer period to avoid the
wrench damage.
•
Do not disassemble the torque wrench and do not make any changes to the wrench.
•
Do not shake or drop the torque wrench.
•
Do not leave the wrench at place of over-heating, humidity or direct sun.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Digital Torque Adaptor
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 70212
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicidad
