Publicidad
Idiomas disponibles
Idiomas disponibles
SPECIFICATIONS
Applications:
Drive shaft:
Speed:
Recommended drill/driver as of 12V cordless, also reversible electric and pneumatic drill/driver with
minimum torque 20 Nm.
Recommended cordless drill for:
Aluminum rivet nuts: 12 volts or more
Steel rivet nuts: 12 volts or more
Stainless steel rivet nuts: 14 volts or more
COMPONENTS
1
Rivet adapter
2
Wrench for nose piece
3
M3 Mandrel / Nose piece
4
M4 Mandrel / Nose piece
5
M5 Mandrel / Nose piece
6
M6 Mandrel / Nose piece
7
M6 Mandrel / Nose piece
8
M8 Mandrel / Nose piece
9
M10 Mandrel / Nose piece
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.
INTENDED USE
This product is used to set rivet nuts made of aluminum, steel and stainless steel of sizes M3-M4-M5-
M6-M8-M10. Please note the choosing of the recommended drive machine.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Rivet Nut Attachment | M3 - M10
M3-M4-M5-M6-M8-M10
Hexagon 6.3 mm (1/4")
max. 240 rpm
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 6834
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicidad
