Descargar Imprimir esta página

Trevi Tab 9 C16 Manual De Usuario página 24

Publicidad

1. Power button and ON/OFF Display.
2. HOME key.
3. Micro USB/Host Socket: connect the unit
to external devices or PC
4. Earphone Socket 3.5mm.
5. DC Socket: connect the DC 5V adaptor.
6. Micro SD CARD slot.
GETTING STARTED
Power on/Power off
Long press
button for 4 seconds to power on the device. It will take about a minute
and half to boot the system.
Unlock the screen by sliding
To power off the device:
Long press
button for 4 seconds, the screen will show the power off options:
Power off or Reboot.
Note
When the device is low battery, it will alert continuously and will shut down automatically
when battery has completely run out. The device cannot be powered on if the battery is
empty, please recharge the battery at least one minute before restart the device.
Standby and Lock screen
Press
button shortly to turn the device to standby mode. Under standby mode, the screen
is blackout and volume is muted. Press
device will then turn to Lock screen while the primary operation of the device will continue.
Unlock the screen by sliding
7. Microphone.
8. Rear Camera.
9. Speaker.
10. Display
11. Frontal Camera.
12. Sensor.
upwards.
button shortly again to reactivate the device. The
upwards to resume to status before power saving.
24

Publicidad

loading