Publicidad
Idiomas disponibles
Idiomas disponibles
VAVD51
Chrono second
Hour Hand
Second hand
Chrono minute
Remarks:
The measurement time indicated by the stopwatch hands move independently of the center hands.
BUTTON
A
CROWN
31
N
1
2
B
BUTTON
31
A
31
B
Button
(START)
* Restart and stop of the stopwatch can be repeated as many times as necessary by pressing button A.
Button
(START)
* Measurement and release of the split time can be repeated as many times as necessary by pressing button B.
Adjusting the stopwatch hand position
- Before setting the time, check if all the chronograph hands
- second, minute - are at the "0"(12 o'clock) position.
- If the stopwatch is in use, press the buttons in the following order
to reset it, and then, check if the hands return to "0" position.
(For details , see "HOW TO USE THE STOPWATCH")
- If the chronograph is counting:
- If the stopwatch is stopped:
- If the split time is displayed:
If either of the stopwatch hands are not in the "0" position , reset
them following the procedure below:
1) Pull the crown out to second click.
2) Press button A or B to reset all stopwatch hands to "0" position.
3) Push the crown back to the normal position.
Time setting
- Before setting the time, check that the chronograph measurement
is stopped.
1) Pull out the crown to the first click.
2) Turn the crown clockwise until the preview day's date appears.
3) Pull out the crown to the second click when the second hand is at
the 12 o'clock position. It will stop on the spot. Set the hands to
the desired time of the day (make sure AM/PM is set correctly) by
turning the crown.
set
set
* When the crown is at the second click position, do not press any
the day
the time
button. Otherwise the chronograph hands will move.
4) Push the crown back in the normal position in accordance with a
time signal.
* Do not set the date between 9:00 P.M. and 1:00 A.M, otherwise
the day may not change properly. If it is necessary to set the date
during the time period, firstly change the time to any time outside
it, set the date and then reset the correct time.
How to use the stopwatch
- The measurement time is indicated by the stopwatch hands that
move independently of the center hands (and 24-hour hand where
applicable).
- The stopwatch can measure up to 60 minutes.
Standard measurement (e.g. 100m race)
Press the buttons in the following order:
Button
A
(START)
Accumulated elapsed time measurement (e.g. basketball game)
A
Button
A
(STOP)
Split time measurement (e.g. 5,000m race)
A
Button
B
(SPLIT)
*
A
0
55
05
50
10
45
15
SEC
40
20
35
25
30
23
N
0
55
05
50
10
45
15
40
MIN
20
B
35
25
30
Date
- The stopwatch minute hand moves correspondingly with the
stopwatch second hand.
- The hands move quickly if the respective buttons are kept
pressed.
Button
A
Button
(STOP)
(RESTART)
Button
A
Button
(RESTART)
(STOP)
*
Button
B
(SPLIT RELEASE)
Minute Hand
BUTTON
CROWN
N: Normal position
1
2
1: Date setting
2: Hour setting
BUTTON
A
B
B
B
A
B
B
A
Button
B
(RESET)
Button
A
Button
B
(STOP)
(RESET)
Publicidad
