Publicidad
Idiomas disponibles
Idiomas disponibles
Using Your Kettle:
Attention: During the first use the heating element undergoes a minor chemical reaction
that may result in a slight odor and/or minor smoking. It quickly goes away.
NOTE: we recommend using distilled water. The kettle should always be unplugged
when filling or adding water.
1.
Open the lid and fill the Kettle with distilled water to desired level. Close lid and
place to side on dry counter.
CAUTION: Do not overfill the product or operate it when empty. Use 'MAX' and
'MIN' water indicator levels. Do not go under the minimum or over the maximum
level.
2.
Pull out the power cord from the base unit and connect it to a power outlet.
3.
Place the Kettle onto the base unit. Making sure there is no water on the exterior
bottom side of the Kettle before placing on the base.
4.
This Kettle has an automatic safety shut off feature to protect against overheating.
If you turn on the Kettle with less than the minimum amount of water, it will still
turn on and function.
NOTE: If the automatic safety shut off is triggered, turn the Kettle off and unplug
the base from the electrical outlet and let stand to cool down 5 to 10 minutes.
Refill with desired water and turn back on.
5.
Once water reaches boiling temperature, it will automatically shut-off. Disconnect
the Kettle from the electrical outlet.
6.
Lift the Kettle from the base using its handle and pour out your hot water into
your mug or container.
CAUTION: Do not open the lid when pouring.
NOTE: If you need to heat water again, let the appliance rest for 60 seconds
before starting again.
WARNING: Always unplug the product from the electrical outlet when it is not in
use or will be left unattended.
FEATURES:
1.
Temperature Presets: Select a temperature preset and push "START/STOP"
button. The kettle will begin to heat to the selected temperature. Once the kettle
has reached the selected temperature it will automatically shut off.
NOTE: Always unplug the base from the electrical outlet when NOT in use.
2.
Keep Warm Function: To maintain temperature for any selected temperature
preset simply press the 'KEEP WARM' button so that the button illuminates white,
signaling the 'KEEP WARM' function is active. Next, select any of the temperature
presets followed by pushing the 'START/STOP' button. The kettle will begin to
heat. Once the desired temperature is reached the 'KEEP WARM' function will
maintain the temperature for 1 hour. After 1 hour, the kettle will beep 3 times and
the 'KEEP WARM' function will deactivate, and the kettle will automatically turn
5
Publicidad
