Publicidad
Idiomas disponibles
Idiomas disponibles
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
IMPORTANT: Please check all packaging material carefully before discarding it as there may
be accessory parts contained within the packaging material.
1. Hand wash the Pitcher, Brew Basket, and removable Mesh Filter with warm soapy water.
Rinse and dry thoroughly.
2. Run a brew cycle with water only. Do not add tea or coffee to the Filter.
3. When the brewing cycle is complete, turn your iced tea /coffee maker off. Discard the water
in the Pitcher and rinse the Pitcher, Lid, Brew Basket, and Mesh Filter once it has cooled.
Using Your Iced Tea and Iced Coffee Maker:
Strength
Slider
Pitcher
WARNING: Avoid contact with hot parts.
Measurement Guide
Black / Green / Herbal Tea Bags (Regular Size)
Tea Bags (Family Size)
Loose Leaf Tea
Ground Coffee
Adding Water and Tea or Coffee:
Attention: First use may cause a slight odor or small smoking upon heating, it is normal. This
is a result of the heating element's chemical reaction. It quickly goes away.
1.
Lift and open the Filter Basket Lid. For your convenience, you can lift out the
removable Filter Basket. Add the desired amount of tea or coffee.
2.
Fill the Pitcher with cold, fresh water to the "Water" line. Then pour the water into the
Water Reservoir. Do not fill past the "Max" line. Close the Lid.
3.
Fill Pitcher with ice up to the "Ice" line and place onto the Drip Tray.
4.
Press the "Brew" power button. The light will illuminate, letting you know the power is
on. The appliance will automatically shut off after brewing.
Note: The "Brew" button does not function as an OFF button. To turn off mid-brew,
unplug the appliance.
5.
When the brew cycle is complete, remove the Pitcher from the drip tray to serve.
6.
Make sure all contents have cooled before handling to clean or store.
Lid
6 to 9 Bags
2 to 3 Bags
1 to 3 tbsp
8 to 12 tbsp
3
Inside:
1. Brew Basket
2. Removeable
Mesh Filter
Water
Level
Indicator
Power
Button
Publicidad
