EGO COMMERCIAL EDX2000-C Manual Del Operador página 11

INTRODUCTION
Congratulations on your selection of the EGO COMMERCIAL 56V Lithium-ion Edger.
It has been designed, engineered and manufactured to give you the best possible
dependability and performance.
Should you experience any problem you cannot easily remedy, please contact EGO
customer service center 1-855-EGO-5656.
This manual contains important information on the safe assembly, operation and
maintenance of your product. Read it carefully before using the product. Keep this
manual handy so you can refer to it at any time.
SERIAL NUMBER _____________________
YOU SHOULD RECORD BOTH SERIAL NUMBER AND DATE OF PURCHASE AND KEEP THEM IN A
SAFE PLACE FOR FUTURE REFERENCE
SPECIFICATIONS
Voltage
Blade length
Edging depth
Ingress Protection Rating
Recommended Operating Temperature
Recommended Storage Temperature
Weight (without battery pack)
* NOTE: IPX5 rating is based on the machine and battery being used together as a
system.
Recommended Accessory
PART NAME
Edger Blade
56V LITHIUM-ION COMMERCIAL 8" CURVED SHAFT EDGER — EDX2000-C/EDX2000-C-FC
DATE OF PURCHASE _________________
56V
8'' (203 mm)
Up to 3'' (76 mm)
IPX5 * (Protected against
water jets)
32°F – 104°F (0°C – 40°C)
-4°F – 158°F (-20°C – 70°C)
10.4 lb. (4.7 kg)
MODEL NUMBER
AEB0800
11