Publicidad
Idiomas disponibles
Idiomas disponibles
PRODUCT SPECIFICATIONS
No Load Speed ............................................................................................................................................0-220/min. (RPM)
Manual Torque ........................................................................................................................................................... 50 ft-lbs.
Motor Torque ................................................................................................................................................. Up to 140 in-lbs.
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
or with damaged or missing parts could result in serious
personal injury.
If any parts are damaged or missing, please call 1-800-525-2579 for assistance.
WARNING:
Do not allow familiarity with this product to make you
careless. Remember that a careless fraction of a second
is sufficient to inflict serious injury.
WARNING:
Always remove battery pack from the tool when you are
assembling parts, making adjustments, cleaning or when
not in use. Removing battery pack will prevent accidental
starting that could cause serious personal injury.
WARNING:
Always wear eye protection with side shields marked to
comply with ANSI Z87.1, along with hearing protection.
Failure to do so could result in objects being thrown into
your eyes and other possible serious injuries.
WARNING:
Do not use any attachments or accessories not recom-
mended by the manufacturer of this product. The use of
attachments or accessories not recommended can result
in serious personal injury.
FEATURES
ASSEMBLY
WARNING:
Do not attempt to modify this product or create acces-
sories or attachments not recommended for use with this
product. Any such alteration or modification is misuse
and could result in a hazardous condition leading to pos-
sible serious personal injury.
OPERATION
APPLICATIONS
You may use this product for the purposes listed below:
„ Removing and installing threaded fasteners
OVERLOAD PROTECTION
When the tool is forced or overloaded, the Li-ion battery
pack will automatically shut off the tool. To reset the tool,
release the trigger and resume operation. If the tool still does
not resume operation, remove and reinsert the battery. Do
not force the tool.
HIGH TEMPERATURE PROTECTION
Li-ion battery packs are equipped with a high temperature
protection feature that automatically deactivates the tool
when the motor is overheated. To resume operation, allow
the tool to cool and then squeeze the trigger.
INSTALLING/REMOVING BATTERY PACK
See Figure 1, page 8.
To install:
„ Unscrew and remove the battery cap.
„ Insert the battery pack into the product as shown.
„ Place the cap over the battery pack and push down until
the cap meets the threads at the end of the tool.
„ Screw the cap on securely.
NOTE: Do not attempt to use this product if the battery
cap is not securely closed.
5 — English
Publicidad
