Midea HMV8054U Manual Del Usuario página 16

en-us Before using for the first time
Heat the empty ovenware at maximum power for ½ to
1.
1 minute.
Check the temperature occasionally during that time.
2.
a The ovenware should still be cold or warm to the touch.
a The ovenware is unsuitable if it becomes hot or if
sparks are generated.
Before using for the first time 7 Before using for the first time
Carry out these steps before using your appliance.
Before using for the first time
¡ The appliance must be properly installed by a qualified
service provider before use.
¡ Read and understand all safety precautions and
information in the Use and Care Manual prior to
operating.
¡ This Use and Care Manual covers several models. Not
all features are available on all models.
7.1 Cleaning the appliance before using it for
the first time
Note: The appliance must be completely fitted and
connected before using it for the first time.
Remove all packaging materials from inside and outside
1.
the oven.
Before heating the appliance, wipe the surfaces in the
2.
oven cavity with a clean, damp cloth and dry.
Clean the accessories using soapy water and a soft
3.
dish cloth.
Note: There may be a slight odor during first uses. This is
normal and will disappear.
7.2 Applying the program label
Apply the included program label in the desired
▶
language to the side of the oven cavity. See the
program label for instructions.
7.3 Setting the time of day
The clock can be set in 12-hour mode.
Touch Clock once.
1.
Enter the time using the number keys. The time fills in
2.
from right to left.
Example: To set the clock to 12:41 type in 1 2 4 1.
Touch Clock to confirm.
3.
a The time of day is displayed.
8 Basic Operation Basic Operation
Basic Operation
8.1 Setting the microwave
Requirement: The appliance is turned off.
16
Enter the desired cooking time with the number keys.
1.
The timer display fills in from right to left.
Example: To set a microwave cooking time of
20 minutes and 30 seconds, enter 2 0 3 0.
a START is blinking on the display.
To start microwave operation with the default power
2.
level 10 touch Start/Enter.
To adjust the power level touch Power Level.
3.
a The default power level
a The segments of the status bar also indicate the power
level.
Enter the desired power level using the number keys.
4.
, the selected power level and START are blinking in
a
the display.
Touch Start/Enter to start microwave operation.
5.
a The cook time starts to count down.
a When the cook time has run out, 4 beeps sound.
a The appliance turns off and the time of day is displayed.
Adding cook time (+ 30 Seconds)
You can add cooking time while the microwave is running.
Touch + 30 Seconds.
1.
a 30 seconds are added to the cooking time.
Touching + 30 Seconds while the appliance is off starts
2.
microwave operation at power level 10 with 30 seconds
cooking time.
Changing the power level
You can change the microwave power level during
operation.
Touch Power Level
1.
a The current power level is blinking.
Enter the desired power level using the number keys.
2.
, the selected power level and START are blinking in
a
the display.
Touch Start/Enter to resume microwave operation.
3.
Opening the appliance door during operation
Opening the appliance door during operation will
▶
interrupt the current mode. Close the appliance door
and then touch Start/Enter to resume operation.
Canceling operation
Touch Clear/Off.
▶
a The active oven mode is canceled.
a The appliance turns off and the time of day is displayed.
a The cooling fan may run on for a while and then turn off
automatically.
is blinking.