Hayward HCF Serie Manual De Instalación Y Operación página 5

Filter
Model
Number
A B
HCF342C 19.64 31.46
HCF348C 27.12 38.94
HCF455C 31.90 48.90
HCF663C 28.22 47.22
* Fill height level (F) may vary depending on media size. Always fill with the required "Filter Sand Quantity" shown above.
WARNING – Read and follow all Instructions.
WARNING – This product should be installed and serviced only by a qualified professional.
Note: Filters are supplied on a pallet with accessories included. Due to their weight and size it is recommended that mechanical means be employed to move
the filter into position. It is also very important to inspect the filters carefully before installing. Make note on the shipping paperwork if there is any damage to
the packaging. FRP filters can be damaged during transportation and it is the responsibility of the installer to inspect at the time of delivery.
Damages to filters from transportation that are not noted on the bill of lading are not covered by Hayward's warranty policy and all costs to repair will be the
responsibility of the owner.
Never put the sand into the filter until it is in its final working position and all prior steps are complete. The filter should be accessible for periodic maintenance
or media change. It is absolutely necessary to leave a minimum access space around the filter(s), as defined above.
Dimensions (Inches)
C D E
42 48.66 3" 18.5"
48 58.03 3" 19.7"
55 74.50 4" 17.3"
67.25 75.82 6" 18.9"
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
Sand Fill Height Level*
Max Flow/
Filter Area Backwash
Rate
F Sq. Ft. Sq. M GPM
9.83 .91 197
13.40 1.24 268
16.49 1.53 330
21.64 2.01 433
Installation
Filter
Clearance (Inches)
Sand
Qty
Gravel / Sand
LPM Vertical Horizontal
(Lbs)
745 225 / 1400 18
1014 600 / 2250 18
1249 500 / 5300 18
1639 850 / 6800 18
4
4
4
4
4