DENIA PANORAMIC WALL Instrucciones De Instalación página 6

If you wish to install the stove with the external air intake, take this into the
consideration before fastening it on the wall. Illustration 4 shows the levels and
measures to be followed in order to make a hole on the wall. The diameter of the
external air intake pipe is 80 mm, so it´s recommendable to use a connection pipe
of wider diameter.
4) In order to hang the stove assure that the holes of back part of the stove meet the
tabs of the bracket by moving the stove in perpendicular direction to the wall
(movement n°1). When the pieces meet, leave the stove to ''fall down", to make sure
that the tabs fully enter the holes (movement n° 2).
Plan of external air intake
Illustration 4
6