CASO DESIGN EcoMate 3268 Manual Del Usuario página 6

4.3 Tare Function
Place an empty container on the scale. The display will now show the weight of the
container. Touch the TARE button and the display shows zero "0" and clears the weight
of container.
Next put the food into the container on the scale. The weight of the food only will appear
on the display. Remove the container and the scale will show the negative weight. Press
TARE and after 2 seconds the display shows zero again.
Press the UNIT button (at backside of display) to interchange the unit between g, oz,
Water ml, Milk ml. Select the UNIT button before weighing. The TARE button cannot be
pressed at the same time as the UNIT button.
4.5 Switch off
The scale switches off automatically.
4.4 Selection of the weight and size units
4.6 Error codes
Over Load Indicator
When the scale is overloaded the display will show the error code
"EEEEE"
screen.
The scale is not stable
This error code is shown then the scale is not stable.
Place the scale on a hard & flat surface.
6