SOMFY R.S485 SETTING TOOL Instrucciones página 10

EN
2.3.3. Setting tool parameters section
SETTING TOOL
PARAMETER
!
Software update
You can update the RS485 SETTING TOOL via the SDN Configuration tool.
https://www.somfy.com/projects/downloads
The RS485 SETTING TOOL will switch off during update.
***
Please contact your local Somfy retailer for pieces of information about the Software
update.
2.4. TIPS AND ADVICE
2.4.1. Questions on the RS485 SETTING TOOL
Observations
The blind does not
operate.
The RS485 SETTING
TOOL do not switch on. The RS485 SETTING
10 Copyright
OK
BATTERY LEVEL
XXX%
BACK
TOOL NODE ID
XXX
BACK
TOOL SOFTWARE
XXX
BACK
BOOT SOFWARE
Rev. XXX
BACK
Possible causes
The wiring is incorrect.
The RS485 SETTING
TOOL battery is low.
TOOL battery is low.
©
2020 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
RS485 SETTING TOOL
Solutions
Check the wiring and
modify it if necessary.
Check whether the
battery is weak and
replace it if necessary.
Check whether the
battery is weak and
replace it if necessary.