Publicidad
Idiomas disponibles
Idiomas disponibles
154792
/
Q910
miter saw
TROUBLE! MACHINE VIBRATES EXCESSIVELY
WHAT'S WRONG?
1.Saw not mounted securely.
2.Stand or bench on uneven floor.
3.Damaged saw blade.
TROUBLE! DOES NOT MAKE ACCURATE MITER CUTS
WHAT'S WRONG?
1.Miter scale not adjusted correctly.
2.Blade is not square to fence.
3.Blade is not perpendicular to table.
4.Workpiece moving.
TROUBLE! MATERIAL PINCHES BLADE
WHAT'S WRONG?
1.Cutting bowed material.
Service Information
Black & Decker offers a full network of company-owned and
authorized service locations throughout North America. All Black &
Decker Service Centers are staffed with trained personnel to provide
customers with efficient and reliable power tool service.
Whether you need technical advice, repair, or genuine factory
replacement parts, contact the Black & Decker location nearest you.
To find your local service location, refer to the yellow page directory
under "Tools—Electric" or call: 1-800-54-HOW TO (544-6986).
2/2/00
11:38 AM
Page 17
WHAT TO DO...
1.Tighten all mounting
hardware.
2.Reposition on flat level
surface.
3.Replace blade.
WHAT TO DO...
1.Check and adjust.
2.Check and adjust.
3.Check and adjust fence.
4.Clamp workpiece to
fence or glue 120 grit
sandpaper to fence with
rubber cement.
WHAT TO DO...
1.Position bowed material
as shown in Figure 16.
Full Two-Year Warranty
Black & Decker (U.S.) Inc. warrants this product for two years against
any defects in material or workmanship. The defective product will be
replaced or repaired at no charge in either of two ways:
The first, which will result in exchanges only, is to return the product
to the retailer from whom it was purchased (provided that the store is
a participating retailer). Returns should be made within the time
period of the retailer's policy for exchanges (usually 30 to 90 days
after the sale). Proof of purchase may be required. Please check with
the retailer for their specific return policy regarding returns that are
beyond the time set for exchanges.
The second option is to take or send the product (prepaid) to a Black
&Decker owned or authorized Service Center for repair or
replacement at our option. Proof of purchase may be required. Black
& Decker owned and authorized service centers are listed under
"Tools-Electric" in the yellow pages of the phone directory.
This warranty does not apply to accessories. This warranty gives you
specific legal rights and you may have other rights which vary from
state to state. Should you have any questions, contact the manager
of your nearest Black & Decker Service Center.
Black & Decker (U.S.) Inc.,
701 E. Joppa Rd.
Towson, MD 21286 U.S.A.
17
If you have any questions, call 1-800-54-HOW-TO.
See 'Tools-Electric'
– Yellow Pages –
for Service & Sales
Publicidad
