Saftey information
Graphical symbols
Warning symbols with
information
on damage and injury
prevention.
Hazard symbol with
information on the prevention
of personal injury caused by
electric shock.
Declaration of conformity
(see chapter "Declaration of
conformity"): Products marked with
this symbol meet all the applicable
Community regulations of the
European Economic Area.
TÜV SÜD approval mark
This symbol indicates that the
device complies with the protection
class II.
Read the operating manual.
Read through the instruction manual
carefully.
Recycle unwanted materials instead
of disposing of them as waste.
All tools, hoses and packaging
should be sorted, taken to the local
recycling centre and disposed of in
an environmentally safe way.
Red light means overload, green
blinking means the inverter is
tracking the maximum power point
22
of the solar panel, and continuous
green light means the working
status.
Caution, risk of electric shock!
Energy storage, 1 min discharge.
1min
Caution: High temperature burns!
General Safety Directions
Caution! When using this
system, observe the following
basic safety measures for
the prevention of electric
shocks and the risk of injury
and fre. Please read all these
instructions before using this
electric tool and please keep
the safety instructions.
Beware! The solar panel,
accessories, or tools
dropping from height can
cause severe injuries or
death, or property damage.
Restrict access to the
installation side.
Beware! The solar panel
dropping from height can
cause severe injuries or
death, or property damage.
Check the mounting system
at least once a year. Ensure
all screws are tightened