Samsung DW80CG40 Serie Manual Del Usuario página 12

using your dishwasher
Touch controls
Touch controls allow you to operate the dishwasher easily.
Touch controls are convenient to operate, requiring only a soft touch.
Touch controls have a simple and stylish design.
Touch controls are easy to clean.
If you have children or you want to clean the Control Interface, recommended activating
the Control Lock feature to lock the control buttons. See page 7.
- Children will not be able to accidently start the dishwasher by touching the controls with
this option selected.
If a cycle is running, the buttons will not respond. (except the P ower button)
-
- If dishwasher is off, only the P ower button responds.
Do not touch the VENT ELEMENT during or immediately after use.
Delay start
When you select the Delay Start option, your dishwasher will:
Start draining to remove remaining water at once (pre-drain).
Your dishwasher will operate the selected cycle when the delay time expires.
Auto Release™ Dry (For applicable models)
The Auto Release™ Dry function, which is designed to improve drying performance, automatically
opens the dishwasher's door 1 to 15 minutes before a cycle ends.
You can enable or disable Auto Release™ Dry using the Setting Mode as described starting below.
Step 1. Entering the Setting mode
1. Turn the dishwasher on.
2. Press and hold the AUTO cycle button for five seconds within 60 seconds
from turning on the dishwasher.
- When you entered the Setting mode,
the Rinse Refill and Clean Indicators will flash.
Step 2. Auto Release™ On/Off
1. Press the Sanitize button to select the Auto Release™ Dry function
setting mode. The Clean Indicator is flashing.
2. Press the AUTO cycle button to change the setting.
Express 60 lights up : Function enabled (Default)
Express 60 lights off : Function disabled
3. Wait 5 seconds to save the setting.
· Once the door opens on the Auto Release™ Dry mode, the door cannot be
closed manually for the next 2 minutes.
· Disabling "Auto Release™ Dry" can affect the drying results. Enable "Auto Release™
Dry" for better drying result.
· After a cycle is complete, the door automatically opens to let steam out. This is normal
and not a product malfunction.
English - 12