Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Assembly
1
. Place the log set into position.
a. Lift the log set by holding the
sides of the heater box for
stability. Do not lift by gripping
the logs or the front grate legs.
b. If installing the unit in a carpeted
area, place a one-piece, solid,
flat surface under the unit. Make
sure that both of the grate feet
rest securely on this surface.
CAUTION: Each of the Realogs™
contain LEDs that pulse and glow.
Handle the log set carefully. They
are fragile and can crack or break if
dropped.
Ember Mat Option
An ember mat is available as an
optional accessory and can be
purchased separately.
2.
Place the ember mat in front and
below the grate.
3.
Connect the wires from the ember
mat to the connector on the right
side of the grate box.
4.
Install the Mirage™ Flame Panel by
inserting the bottom edge into the
tabs between the back log and grate
log assemblies.
a. The painted side should be at
the back and the smooth side to
the front.
b. Position the screen so that the
cutout in the middle aligns with
the center tab. Start on one end
to insert the screen in all the
way across. When in place, the
screen should be centered and
slightly curved.
5.
Plug the unit directly into a wall
outlet.
7
Publicidad
