LG WS9D76 Serie Manual De Instalación página 10

INSTALLATION
10
Ventilation
For Ventilation
For correct ventilation, the ventilation opening of 50 mm should be required between the back wall and
the floor of the installation cabinet, the ventilation gap of 5 mm is required between the oven top rim and
the furniture lower rim, and between the oven both sides rim and the side cabinet, these openings must
not be closed by any way. So ensure that the sides are not touching the front edges of the housing.
Oven
a
b Close kitchen cabinet or appliance.
Operation Checklist
Each of the functions has been factory checked
before shipping. However, it is suggested that you
verify the operation of the oven once more. Refer
to the Owner's Manual. Follow the instructions for
the basic check.
1
Turn on power supply.
• Model WSED766**, WS9D76****: The initial
signal sound is heard and startup animation
appears in the display.
• Model WSED761**, WS7D765***: The initial
signal sound is heard and the clock appears
in the display.
2
Check the operation of the Hot air mode.
• Model WSED766**, WS9D76****: Select Hot
air in the cooking mode screen.
• Model WSED761**, WS7D765***: Select Hot
air mode using the control knob.
Touch Start. The oven starts to preheat. Check
the convection fan operation. Convection fan is
in the back wall.
A chime sounds once preheating is complete.
Touch STOP.
3
Check the operation of the Grilling mode.
• Model WSED766**, WS9D76****: Select
Large grill in the cooking mode screen.
- Scroll to set the desired temperature: Low,
Medium, or High.
• Model WSED761**, WS7D765***: Select
Large grill in the cooking mode screen. Scroll
to set the desired temperature: Low,
Medium, or High.
- Touch Start. The oven door must be closed
to use the Grilling function. Touch STOP to
cancel at any time.
4
Turn on and off the oven light to check the
lights are in normal condition.