Publicidad
Idiomas disponibles
Idiomas disponibles
• Any necessary repairs or adjustments may be carried
out by trained personnel only�
• After lengthy transport in cold environments, during
the subsequent transition to a warm environment
do not switch on the device immediately, but wait for
the temperature to equalize�
• Do not expose the device to heat sources which would
heat it beyond the normal temperature�
• In the event of an obvious malfunction of the device,
e�g visible smoke or odour, significant malfunction or
damage to the cover, switch off the device and contact
a service provider�
• The power cord must not be plugged in if the power
supply is defective or if the device is otherwise dam‑
aged�
• Do not listen to music or the radio at a high volume� This
could lead to permanent hearing damage�
• Use the device only with batteries that are approved for
the device�
Power supply
1� For operation without a power cord, use the built‑in
Li‑Ion battery located in the battery compartment (14)�
This battery is charged automatically when the device is
connected to a power supply with the power cable (15)�
2� Use the power cord (15) for connecting to a power sup‑
ply�
Device control
1. Switching the device on / off and volume control
Briefly press the VOL/
Briefly press the button again to switch the device off
(switch to STAND‑BY mode)�
Increase the volume level by turning the VOL/
clockwise and decrease it by turning the knob coun‑
ter‑clockwise�
The Volume Level is shown on the device display�
Warning: The display always goes out shortly after being lit
up� To switch it on again, briefly press any button�
2. Changing the device mode
By pressing the MODE button (6) repeatedly, you can
switch between the individual modes of the device:
FM
radio
BT
Bluetooth player
AUX
playback from an external source connected by ca‑
ble
USB
playback from a USB drive
TIME date and time display
Radio
Press the MODE button (6) repeatedly to switch the device
to FM mode�
1. Manual search for radio stations
In radio mode (the text Radio mode will appear on the
display), find the frequency of the desired radio station by
turning the TUN/MEM (4) knob� You can then press and
hold the TUN/MEM button to store the tuned radio station
in the first free position of the device memory, or reposi‑
tion the selected device memory position� The number of
the stored position in the device memory is indicated on
the display by the letter CH and the position number�
button (1) to start the device�
2. Automatic search for radio stations
In radio mode (Radio mode appears on the display), press
the
button (8)� The device will start scanning for radio
frequencies (the text Scanning appears on the display)�
After finding the first strong radio signal, the device will
store this radio station in position CH1 and then contin‑
ue to search for other radio frequencies� Any subsequent
radio stations will be stored in the next available memory
position of the device� When the search is completed, the
radio will switch to the first memory position�
3. Selecting a stored radio station
In radio mode (the text Radio mode appears on the dis‑
play), scroll through the memory positions by pressing the
button (9) repeatedly for scrolling in ascending order,
or by continuously pressing the
ing through the memory in descending order�
4. Deletion of stored radio stations
To delete all stored radio station positions, press and hold
the MODE button (6) until the text delete current ap‑
pears on the display�
Bluetooth player
Press the MODE button (6) repeatedly to switch the device
to the BT mode�
1. Pairing with a Bluetooth device
Turn on the Bluetooth device search feature on your phone
and search for the Bluetooth pairing name: (CBT‑02)� Ena‑
ble pairing on your phone�
2. Playback
After a successful pairing, the text "Connected" will appear
on the device display and the device will automatically
start playing the songs found on the phone�
To play / pause music, press the
knob
To scroll through the playlist, repeatedly press the
ton (9), or alternatively the
3. Range
The connection range of a Bluetooth device is up to 30 me‑
ters in an open space, and about 10 m in a built‑up area�
AUX player
Press the MODE button (6) repeatedly to switch the device
to the AUX mode�
1. Connecting to an external playback source
Connect to an external device with an audio cable with
a JACK 3�5 connector to the AUX input socket (11) on the
back of the device�
2. Playback
In AUX mode, you can only control the volume on the de‑
vice!
USB player
Press the MODE button (6) repeatedly to switch the device
to the USB mode�
1. Connecting the USB drive
To play songs, connect a USB disc (flash drive) to the USB
port (12) on the back of the device� The disc must be for‑
matted with the FAT32 file system� Only MP3 and WMA
songs can be played�
After inserting the USB disc, the unit automatically starts
scanning the storage of the connected USB disc (the text
scanning... is displayed)� If the device finds MP3 or WMA
files, it switches to USB player mode (the text USB is dis‑
played), loads all music, and starts playing the first file on
English
button (10) for scroll‑
button (8)�
but‑
button (10)�
13
Publicidad
