YaberAuto YA60 Manual Del Usuario página 6

Error Message/ Cause/ Solution
Error Message
+ Beeping + "9"
+ Beeping + "8"
+ Beeping + "7"
+ Beeping + "6"
+ Beeping + "5"
+ Beeping + "4"
+ Beeping + "3"
Specifications
Model
USB-C Input/Output
USB-A Output 1
USB-A Output 2
DC Output
Over-Discharge Protection
Discharging Temperature
Size
Package Content
YaberAuto Car Jump Starter (YA60) *1
12V Battery Jumper Cable *1
USB-C Charging Cable *1
USB-A Charging Cable *1
DC Cigarette Lighter *1
Storage Bag *1
Cause
Reverse connection
The temperature of jump
starter is too low or high
Over-Current Protection
Non-stop starts vehicles
more than 4 times,
it entered safe mode
Short-Circuit Protection
External voltage is higher
than jump starter's voltage
Low Voltage Protection
PD45W Max (5V 3A,9V 3A,12V 3A,15V 3A,20V 2.25A)
5V/3A, 9V/2A, 12V/1.5A
5V/3A, 9V/2A, 12V/1.5A
15V10A(150W Max)
13v±0.3v
≦
-20℃～60℃ (-4℉ ~140℉)
243.5 *113 *67mm
EN
Error Solution
Please correct the connection between battery
clamps and battery terminals.
Restore the jump starter temperature value to
-4℉ to 140℉.
Stop starting the vehicle and the error will
disappear after 30s.
Stop starting the vehicle and the error will
disappear after 10mins.
Disconnect the connection and the error will
disappear.
Disconnect the connection and the error will
disappear.
Please charge the jump starter as soon as
possible to prevent battery damage.
YA60
4