Samsung VS20T75 Serie Manual Del Usuario página 11

INSTALLATION
Product Specification
Model
Power
Rated power consumption
Battery specification
Charging time
Handy
Cleaning
time Soft Action
(Default : Brush
MID)
Turbo Action
Brush
❇ ❇ Charging and cleaning time may differ depending on the brushes and the conditions of use.
Installation
Installing the wall mount
CAUTION
• Install the wall mount on a hard concrete
wall.
– If you install the wall mount into drywall
and there is no stud present, use the
drywall anchors to secure the charger.
#1 Connecting the cable
• To disassemble the wall mount, follow steps
in reverse order.
VS20T75****
550 W
Lithium-ion 21.9 V, 2850 mAh,
6 cell
Approximately 6 minutes (MAX) /
Approximately 30 minutes (MID) /
Approximately 60 minutes (MIN)
Approximately 9 minutes (MAX) /
Approximately 20 minutes (MID) /
Approximately 40 minutes (MIN)
Approximately 9 minutes (MAX) /
Approximately 20 minutes (MID) /
Approximately 35 minutes (MIN)
100-240 V ~ 50-60 Hz
Lithium-ion 21.6 V, 1800 mAh,
3.5 hours
Approximately 5 minutes (MAX) /
Approximately 20 minutes (MID) /
Approximately 40 minutes (MIN)
Approximately 6 minutes (MAX) /
Approximately 20 minutes (MID) /
Approximately 30 minutes (MIN)
Approximately 5 minutes (MAX) /
Approximately 18 minutes (MID) /
Approximately 27 minutes (MIN)
#2 Positioning the wall mount
01 The wall mount installation should be set
so the top of the wall mount is 113 cm
(44 1/2 in)from the floor.
02 Using the wall mount as a template, mark
where the screw holes will be placed.
03 Drill the holes to a depth of 50 mm (2 in)
using a 6 mm (1/4 in) drill bit, and put the
provided screw anchors into the hole.
04 Fix the wall mount to the wall with the
provided screws.
05 Plug in the wall mount, place the vacuum
into the wall mount, and then confirm that
the battery level indicator is displayed.
❇ ❇ Please refer to the QR code for
detailed information on the
installation of the wall mount.
VS15T70****
410 W
6 cell
English 11