Philips HQ6900 serie Manual De Instrucciones página 8

ENGLISH
8
5 Put the shaving unit back onto the shaver.
Every month: shaving heads
1 Switch off the shaver. Remove the mains plug from the wall socket
and pull the appliance plug out of the shaver.
2 Press the release button (1) and remove the shaving unit (2).
3 Turn the wheel anticlockwise (1) and remove the retaining frame (2).
4 Remove the shaving heads (cutters and guards) one by one and clean
them with the cleaning brush supplied.
Note: Do not clean more than one cutter and guard at a time, since they are
all matching sets. If you accidentally mix up the cutters and guards, it may take
several weeks before optimal shaving performance is restored.
5 Clean the cutter with the short-bristled side of the cleaning brush.
Brush carefully in the direction of the arrow.