Cleaning Instructions - Nemaxx BT55X Instrucciones De Uso

KEN001BT55X

CLEANING INSTRUCTIONS

● Stop running the device before cleaning.
● Please pull out the plug when the device stops running completely.
Cleaning of the main unit
● Use a soft cloth with warm water and diluted neutral abluent.
● ● Use vacuum cleaner to clean the dust covered on the air inlet board.
ATTENTION
Do not use harsh cleaning products.
It will cause deformation and discoloration.
Cleaning of bucket
Clean it with running water for two or three times.
Filter cleaning
Clean the filter with a vacuum cleaner or clean water.
Dry it and then put it back to the device.
WHEN NOT USING FOR A LONG TIME
1. Pull out the plug; put away the power line and put it in dry and cool place.
2. Don't store the device horizontally, or it will cause malfunction or abnormal sounds.
3. Remove the humidity sensor from the unit when storing it in a place with high humidity.
Please have professionals place it back in the unit.
4. Pour the water out of the bucket completely.
5. Clean main unit, bucket, and filter.
6. Cover the unit with a plastic bag.
7. Put the device in a dry and ventilated place.
ATTENTION
Don't tilt or lie the device on the side
(It will cause leakage if there is still water in it).
EN
11
Version: 4.0
28.08.2017