Taurus CG4HN/B Manual Del Usuario página 27


Place the flame spreader (4) on to the burner cup (5) so that the ignition device and the
flame supervision device extend through their respective holes in the flame spreader. The
flame spreader must click into place correctly.

Position the burner lid (1, 2, 3) onto the flame spreader (4) so that the retaining pins ft into
their respective receded.

Replace parts in the correct order after cleaning.

DO not mix up the top and bottom.

The locating pins must fit exactly into the notches.
FOR EU PRODUCT VERSIONS AND/OR IN CASE THAT IT IS REQUESTED IN
YOUR COUNTRY:
ECOLOGY AND RECYCLABILITY OF THE PRODUCT

The materials of which the packaging of this appliance consists are included in a collection,
classification and recycling system. Should you wish to dispose of them, use the appropriate
public recycling bins for each type of material.

The product does not contain concentrations of substances that could be considered
harmful to the environment.
ANOMALIES AND REPAIR

Take the appliance to an authorised technical support service if product is damaged or other
problems arise. Do not attempt to disassemble or repair the appliance yourself as this may
be dangerous.
TROBLESHOOTING:

Some minor problems can be resolved as follows:
- This symbol means that in case you wish to dispose of the product once its
working life has ended, take it to an authorised waste agent for the selective
collection of Waste from Electric and Electronic Equipment (WEEE).