Defort DSC-800 Instrucciones De Servicio página 6

English
Steam cleaner
GENERAL INFORMATION
Dear Customer, Please read and comply with these
original instructions prior to the initial operation of your
appliance and store them for later use or subsequent
owners.
PROPER USE
Use the steam cleaner only for private households.
The appliance is intended to be used with steam and
can be used with the appropriate accessories as de-
scribed in these operating instructions. You will not
need any detergent. Please adhere to the safety in-
structions.
TECHNICAL SPECIFICATIONS
PRODUCT ELEMENTS
SCOPE OF DELIVERY
The scope of delivery of your appliance is illustrated on
the packaging. Check the contents of the appliance for
completeness when unpacking.
SAFETY
● The appliance may not be used in areas where a
risk of explosion is present.
● If the appliance is used in hazardous areas the cor-
responding safety provisions must be observed.
● Never use the appliance in pools containing water.
● Check the faultless condition of the appliance and
the accessories before using it. Otherwise, the ap-
pliance must not be used. Please check in particular
the power cord, the safety lock, and the steam hose.
● If the power cord is damaged, please arrange imme-
diately for the exchange by an authorized customer
service or a skilled electrician.
● Please arrange for the immediate exchange of a
damaged steam hose. You may only use a steam
hose that is recommended by the manufacturer.
● Never touch the mains plug and the socket with wet
hands.
● Never use the appliance to clean objects containing
hazardous substances (e.g. asbestos).
● Never touch the steam jet from a short distance with
your hands and never direct the steam jet to persons
or animals (risk of scalds).
● The appliance may only be connected to an electri-
cal supply which has been installed in accordance
with IEC 60364.
● The appliance may only be connected to alternating
current. The voltage must correspond with the type
plate on the appliance.
● In wet rooms, e.g. bathrooms, connect the appliance
to sockets with a series connected RCD adapter.
6
1
2
● Unsuitable extension cables can be hazardous.
Only use a splashproof extension cable with a mini-
mum section of 3x1 mm².
● The connection between power cord and extension
cable must not lie in water.
● If couplings of the power cord or extension cable are
replaced the splash protection and the mechanical
tightness must be ensured.
● The operator must use the appliance correctly.
When working with the appliance, he must consider
the local conditions and pay due care and atten-
tion to other persons, in particular children, who are
nearby.
● This device is not intended for use by persons (in-
cluding children) with reduced physical, sensory or
mental abilities or lacking experience and/or knowl-
edge, unless they are supervised by a person re-
sponsible for their safety or are instructed by these
persons on the use of the device. Children should be
supervised, to ensure that they do not play with the
device.
● Never leave the appliance unattended when it is in
operation.
● Be very careful while cleaning tiled walls with sock-
ets.
● Make sure that the power cable or extension cables
are not damaged by running over, pinching, drag-
ging or similar. Protect the power cable from heat,
oil, and sharp edges.
● Never fi ll solvents, solvent-containing liquids or un-
diluted acids (e.g. detergents, benzene, paint thin-
ner, and acetone) into the water reservoir as these
substances affect the materials used on the appli-
ance.
● The steam switch must not be locked during the op-
eration.
● Protect the appliance from rain. Do not store out-
side.
QUICK REFERENCE
Fill water reservoir, close reservoir cover.
Plug in the main plug.
The steam cleaner is ready for use after approx. 2 min.
Push the lock backwards and press the steam lever.
ATTACHING THE ACCESSORIES
If necessary, connect the required accessories to the
steam nozzle.
● To do so, insert the two grooves of the accessories
into the latches of the steam nozzle and turn clock-
wise until the stop.
Danger
Hot water may drip out of the accessory parts while
you are detaching them! Never detach accessory parts
while steam streams out - risk of scalding!
● Turn the installed accessories counterclockwise and
pull them off the steam nozzle.