Publicidad
Use the + and - buttons to set the minute of snooze you need.
• Press "mode" button to confirm your setting and to end the setting procedure.
F.Y.I.: If there is no valid operation within 20 seconds, it will automatically return to normal
time mode from the alarm time set mode • The alarm will sound for 2 minutes if you do
not deactivate it by pressing any button. In this case the alarm will be repeated
automatically after 24 hours • Rising alarm sound (crescendo, duration: 2 minutes)
changes the volume 4 times whilst the alarm signal is heard.
Switching off the alarm signal: When the alarm is ringing, press any button except the
"Light/snooze" button to stop the alarm signal. It is not necessary to reactivate the alarm.
It will ring again this time next day.
Snooze function: When the alarm is ringing, touch the "Light/snooze" button the alarm
mode will to get to SNOOZE mode. The alarm signal sounds again after already been set.
RF Transmission Procedure: The weather station automatically starts receiving
transmission from outdoor thermo sensor for outdoor temperature & humidity after
batteries inserted. • The remote sensor will automatically transmit temperature and
humidity signal to the Weather Station after batteries inserted. • If the Weather Station
failed to receive transmission from outdoor sensor (- -.- display on the LCD), press and
hold CH button for 3 seconds to receive transmission manually. RF icon flashes on the
LCD, The Weather Station to receive the remote sensor. • If the weather station is received
with 2 or 3 transmitters signals, Press CH button to query CH2, CH3 data or cyclic display.
Query Maximum/minimum numerical value When the indoor / outdoor temperature /
humidity are shown in the LCD, The weather station began to record temperature/humidity
maximum and minimum numerical value. Press once "MEM" button, the LCD will display
maximum value of temperature/ humidity, The LCD will display the minimum value
of temperature/humidity if press once "MEM" button again when the maximum value
is displayed. • At the same time, there are MAX or MIN displayed on the LCD.
• The temperature/humidity maximum/minimum value will RE records after press and
hold MEM button 3 seconds. F.Y.I.: If the temperature reading is below ranges, the LL.L
will be displayed. If the temperature reading is above ranges, the HH.H will be displayed.
Ice alert: The ice alert symbol appears and flashing when the outdoor temperature
at -1℃to + 2.9°C or +30.2℉ to + 37.2°F.
Weather forecasting function: Please take the weather forecast from your local weather
forecasting service into account as well as the forecast from your weather station. If there
are discrepancies between the information from your device and from the local weather
forecasting service, please take the advice of the latter as authoritative.
-04 -
• The weather forecast is calculated from evaluation of fluctuations in the barometric
pressure and may deviate from the actual weather conditions. • The weather station
displays the following weather symbols: Sunny, Slightly Cloudy, Cloudy, Rainy. Have Rainy,
Snowy • The weather symbols indicate the weather fluctuation over the next 8 hours
and not the current weather.
Background lighting: In battery powered mode, touch the "Light/snooze" button, the
backlight illuminates for 8 seconds. • Press the "rainbow" button to set different backlight
colors, Change one color every time you press it, there are 8 kinds: white, red, orange,
yellow, green, cyan, blue and purple. • In adapter powered mode, press the "-" button to
adjust the brightness of the backlight, press the "rainbow" button to set different backlight
colors. • Press the "loop" button, the backlight color will evolve slowly, when evolving to
your favorite color, press "loop" button again to stay in this color.
PL
Domowa Bezprzewodowa Stacja Pogodowa
FUNKCJE: Radiowa kontrola czasu DCF • Czas w formatach 12/24h • Budzik
• Funkcja drzemki (1-60min) • Port USB do ładowania urządzeń mobilnych (5V1A)
• Komunikat o słabej baterii • Temperatura w jednostkach °C lub °F
• Pomiar wilgotności: Wewnętrzna i Zewnętrzna, w zakresie 20%~95%
• Temperatura: Wewnętrzna w zakresie: -9.9°C (14.2°F) ~ 50°C (122°F)
- Zewnętrzna w zakresie: -25°C (-13°F) ~ 50°C (122°F)
- Wybór jednostki °C lub °F. Ostrzeżenie o mrozie
• Zapamiętywanie maksymalnej/ minimalnej temperatury oraz wilgotności
• Bezprzewodowy czujnik zewnętrzny: Mocowanie ścienne lub stojak. 3 kanały
do wyboru - Częstotliwość sygnału 433.92 MHz - Zasięg 60m (na otwartej przestrzeni)
• Funkcja prognozowania pogody
• Zasilanie: Stacja pogodowa: Baterie: 2x LR06 AA / Zasilacz: 5V1.2A
Czujnik bezprzewodowy: Baterie: 2x LR06 AA
Opis urządzenia (ilustracja):
1: Przycisk dotykowy: światło/drzemka
2: przycisk „mode" (wybór trybów )
3: przycisk „MEM" (pamięć)
4: przycisk „+"
5: przycisk „- / wave"
6: włącznik/wyłącznik alarmu
7: wejście zasilania sieciowego
8: port USB
9: przycisk „CH"
10: przycisk „loop"
11: przycisk „rainbow"
12: godzina
13: komunikat o niskim poziomie baterii
14: temperatura i wilgotność w pomieszczeniu
15: niski poziom baterii czujnika
16: Temperatura i wilgotność na zewnątrz
17: Ikona pogody
18: informacja o spadku/wzroście ciśnienia
19: Ikona ostrzeżenia o mrozie
20: Ikona czasu letniego
21: Ikona kontroli radiowej
22: Pokrywa gniazda baterii
GB151
-05-
Publicidad
