Control Panel - LF style selections F13-I-002-045A Instrucciones De Montaje

OPERATING INSTRUCTIONS

CONTROL PANEL

4a. Power: Push button to turn on or turn off. If OFF,
all functions (except timer) will be restored at the next
power ON. Note: Unplugging the unit will reset all
functions.
4b. Flame: Press to activate the flame function. This
button controls the brightness of flame and ember
effect. When the fireplace is first turned on, the flame
will come on at the highest setting; press DOWN or
UP button to adjust the brightness of flame. There
are 6 levels you can cycle through, including the OFF
setting (the ember remains on). When this feature is on,
display screen FLAME icon is on also. When adjusting
the flame brightness with UP or DOWN button, the
number of the FLAME LEVEL BARS correspond to its 5
brightness levels.
4c. Heater: Press to activate the heater function. The
system will start the temperature setting at 95°F. When
this feature is on, display screen HEATER icon is on
also. There are 7 adjustable heat levels, ranging from
65°F to 95°F. Press the DOWN or UP button to adjust
the levels, noting each level increases or decreases the
temperature by 5°F. You may switch the temperature
display from Fahrenheit to Celsius by pressing the
HEATER button for approximately 6 seconds.
Note: Without any adjustments after approximately
6 seconds, the display screen will show the room
temperature.
4a
4b
4c
12
Lowes.com