EN
1 - 2. MIC Input. XLR 3 pin/Jack 1/4" connectors for a
microphone input.
3. LINE Input. 2x RCA connectors that allow to connect
an external unbalanced audio device (CD, tuner, deck)
4. LINE Input. XLR 3 pin connector for a LINE input
5. LINE Out. Jack 1/4" connector in order to send the
pre-amplified signal to another amplifier device.
6. LINE Out. XLR 3 pin connector in order to send the
pre-amplified signal to another amplifier device.
7. SD Card Slot.
8. LCD Display & button interface
9. USB port
15. POWER/LIMIT LEDs
POWER LED (green colour) lits when the unit is connected. LIMIT LED (red colour) lits
when the output signal has distortion. Reduce the volume in order to turn off this LED.
16. LINK OUTPUT. Low impedance output in order to connect a passive loudspeaker
17. On/Off Power switch. Press it to power on/off the
device
18. AC power. Connect the incorporated AC power cord.
19. VOLTAGE SELECTOR. It allows to select the main input voltage according the installation place.
Active Series
Woofer
Tweeter
Amplifier
Functions
M 515
Model
Type
Diameter
Coil Diameter
Diameter
Coil
Amplifier type
Power Handling (AES)
Frequency Response
Sensitivity
Max. SPL
Dimensions
Weight
Input connectors
XLR3-Jack 1/4" (MIC) - XLR3-RCA (LINE)
Output connectors
Controls
EQ (Treble- Bass), Mic, Line, Main volume
MP3 player, LCD Display, Remote control, FM radio, Bluetooth, USB/SD
- 3 -
User Manual / Manual de uso
10. MIC Volume control. It is used to adjust the signal
level from the Microphone input.
11. LINE Volume control. It is used to adjust the signal
level from the LINE input.
12. MAIN Volume. It controls the level of the overall
system output.
13. TREBLE control. It provides a boost or cut of up to
15 dB for the high frequency.
14. BASS control. It provides a boost or cut of up to
15 dB for the high frequency.
M 515
Self powered loudspeaker
15"
2"
25 mm
1"
Class-AB
300 W
55 Hz - 20 kHz
95 dB
119 dB
380 x 325 x 600 mm
14,5 kg
XLR3-Jack 1/4"