Makita DCL181F Manual De Instrucciones página 11

Example 4: Prefilter's securing lip is not firmly locked
into groove of cleaner housing
Fig.25
► 1 . Groove of cleaner housing 2. Prefilter 3. Securing
lip
Reassembly for high performance
filter
1. Connect high performance filter. At this time, make
sure to twist high performance filter so that securing lip
is firmly locked into cleaner unit.
1
Fig.26
► 1 . High performance filter 2. Securing lip
1
Fig.27
► 1 . Securing lip
1 3
2
2
2. Connect capsule. Align O mark on capsule with O
mark on handle and then firmly twist capsule in direction
of arrow until it is secured.
Fig.28
► 1 . O Mark
Fig.29
► 1 . Handle 2. Capsule
NOTE: Always remove dust ahead of time, as suction
power will be reduced if there is too much dust in
cleaner.
NOTE: Always be sure to check that high perfor-
mance filter is loaded correctly prior to using cleaner.
If they are not loaded correctly, dust will get into the
motor housing, and cause motor failure.
If the following examples occur, high performance
filter is not loaded correctly. Reload them correctly to
rectify problem.
Problem Examples
Securing lip of high performance filter is not firmly
locked into groove of cleaner housing.
Fig.30
► 1 . Securing lip 2. Groove of cleaner housing
11 ENGLISH
1
1
1
2
2