BLUE SKY OKCSS-FAUCET Manual Del Propietário página 6

Disconnect the quick connector (E) from
the end of the faucet hose by pressing
the blue button in and pulling the quick
connector out.
Insert the small rubber washer (F) into
the lowest hanging faucet connector
and thread the quick connector into the
lowest hanging faucet connector with the
small rubber washer in place. Do not over
tighten.
Making sure the sprayer head is straight on
the faucet neck and that the faucet hose
is not twisted, push the end of the faucet
hose firmly into the quick connector. Pull
down slightly to ensure a good connection
has been made.
Take apart weight (G) by removing two
screws one on each side with a phillips
head screwdriver. Place the weight around
the faucet hose just above where the
hose curves, and secure both halves of
the weight around the hose with the two
screws one on each side of the weight with
a phillips head screwdriver.
6 | www.bluesk youtdoorliving.com