Publicidad
Idiomas disponibles
Idiomas disponibles
Bagger Usage
NOTE: To ensure longevity and reliable performance do not allow grass bags to fill over the
edge of the rim before emptying.
NOTE: When both grass bags are full, place the tractor on a firm, level surface, disengage
the PTO, turn the tractor engine off and set the parking brake.
1.
Flip seat up.
2.
Open the bagger cover by pushing in on the rear, right-side tab with your right hand, as seen
in (1) of Figure 25, and lifting the cover with your left hand in the center rear of the bagger
cover (2). Do not remove the hose assembly from the tractor.
3.
Remove the grass bags by lifting up, (1) in Figure 26, and moving the bags away from the bag
support assembly (2).
4.
Empty the grass clippings at a proper disposal site, use the handle at the bottom of each grass
bag. Holding the bag firmly, empty the contents.
5.
Replace the grass bags in the reverse order. Close the lid, pivot the seat down, restart your
tractor and resume cutting your grass.
NOTE:
Retighten all wing knobs periodically throughout the season.
OPERATION
2
Figure 25
Figure 26
9
1
2
1
Publicidad
