ETI SHOREBREAKER 50403111 Guía De Uso Y Cuidado página 4

installation (continued)
7
Securing the lens cover
□ Place the lens cover (A) over the light board (B) and
gently tighten the screws to firmly secure the lens
cover (A) to the fixture housing (C).
□ Restore power at the electrical panel.
□ Turn on the light switch to activate the fixture.
A
C
Lens Cover
Screws B
adding a decorative Guard
1
Selecting a decorative guard
□ Choose a decorative guard (not included) for the fixture, if desired.
Part Description Model # Color
90600506 White
F Decorative Guard
90600505 Black
90600502 White
G Decorative Guard
90600501 Black
nOte: Separate parts not shown to actual size.
Contact ETi for more information and to purchase.
8
Sealing the fixture housing
□ Apply silicone caulk (not provided) around the back edges
of the fixture housing (C) to ensure a watertight seal.
A
C
F
G
6
adding a decorative Guard (continued)
2 3
Preparing to install a
decorative guard
□ Remove the screws from the lens
cover (A).
A
adjusting the Color temperature of the Light
Ordering # 50403111/Part # COL-11-802-MV-R-W and Ordering #
50403112/Part # COL-11-802-MV-R-B
This LED light fixture allows you to customize the color
temperature of the light using three settings: soft white, cool
white, or daylight.
□ Choose your favorite correlated color temperature (CCT)
from three options: 3000K Soft White, 4000K Cool White, or
5000K Daylight.
□ Move the toggle switch on the light board (B) to make your
selection before attaching the lens cover (A) to the fixture
plate (C).
nOtiCe: The factory setting for the correlated color
temperature (CCT) is 3000K, which is the warmest white light.
Securing the decorative guard to the fixture
□ Place the decorative guard (not included) over the lens cover (A).
□ Secure the decorative guard with the screws removed from the lens
cover (A).
A A
F
3000K 4000K 5000K
7
Please contact 1-855-384-7754 for further assistance.
G
A
WWW.ETiSSL.COM