Publicidad
Idiomas disponibles
Idiomas disponibles
There are two ways of using the equipment:
1. After activation close valve B (fig.13), oil will be sucked by the vacuum in the transparent
chamber. Pressing on valve B the oil is immediately drained into the main reservoir and in the
mean time, the vacuum coming in from the reservoir will make the transparent chamber ready for
another operation. To transfer fluids from the transparent chamber to the reservoir tank press
down on valve B and secure it with the metal lock provided (fig.14). Always do this operation
when the oil is hot. (fig.15).
2. It also possible to suck hot oil keeping the air hooked up to the device
14
WARNING! In this case, before draining the oil from the transparent chamber into the main reservoir,
valve B must be open (fig.14).
WARNING! Never fill the transparent chamber over the stop mark.
WARNING! Never fill the reservoir over the limit indicated by the side gauge.
SW-Stahl und Werkzeugvertriebs GmbH
L
e
v
e
k r
u
s
r e
t S
a r
s
s
e
6
5
D
4 -
2
8
9
7
R
e
m
s
c
h
e
d i
B
B
Tel. +49 (0) 2191 / 46438-0
F
ax +49 (0) 2191 / 46438-40
- E
M
a
: l i
n i
15
o f
@
s
w
s
a t
l h
d .
e
Publicidad
