Publicidad
Idiomas disponibles
Idiomas disponibles
Attachment Placement & Removal
1. Ensure that the iron is unplugged and not heated before adding or switching
attachments.
2. Using the thermal glove provided, attach the desired styling attachment to the
tool base by lining up the ▲ arrow to the ▼arrow on the UNLOCK position.
To lock attachment in to place: Press down the attachment at the
cool tip end and twist the handle ring to the right to match up the ▲
arrow to the ▼ arrow on the LOCK position.
To unlock the attachment: Allow the attachment to cool and turn the
tool off before removing as it may still be heated. Twist the handle ring
to the left to match up the ▲ arrow to the ▼ arrow on the LOCK position.
MAINTENANCE
Your appliance is virtually maintenance free. No lubrication is needed. Keep
heated surfaces clean and free of dust, dirt, and hair spray. If cleaning
becomes necessary, disconnect the appliance from the power source and
wipe the exterior with a damp cloth. If the cord becomes twisted, untwist
prior to use.
When in frequent daily use, set the iron on a thermal mat or other proper
surface.
Electrical converters CANNOT be used.
If any malfunction occurs, do not attempt to repair the tool yourself.
Call the Customer Service. (See "LIMITED WARRANTY" Section).
GROUND INSTRUCTIONS, SERVICING OF DOUBLE-INSULATED
APPLIANCES
In a double-insulated appliance, two systems of insulation are provided
instead of grounding. No grounding means is provided on a double-
insulated appliance, nor should a means for grounding be added to the
appliance. Servicing a double-insulated appliance requires extreme care
and knowledge of the system and should be done only by a qualified
service personnel. Replacement parts for a double-insulated appliance
must be identical to the parts they replace. A double-insulated appliance is
marked with the words "DOUBLE INSULATION or DOUBLE INSULATED."
The symbol within a square
may also be marked on the appliance.
5
Publicidad
