Mode Menu
The Mode menu is used to configure the type of sound the loudspeaker delivers. Available
options for this selection are : LIVE , MUSIC , SPEECH and CLUB.
LIVE - is used for live sound applications.(Default)
MUSIC - is used for recorded music playback.
SPEECH - is used for spoken word applications.
DJ - is used for recorded electronic music playback.
LOCATION Menu
The Location menu is used to optimize the loudspeaker for different placements. Available
options for this selection are: TRIPOD, MONITOR, WALL, and SUSPEND.
TRIPOD - is used when the loudspeaker is placed on a tripod stand or placed on a pole.
(Default)
MONITOR - is used when the loudspeaker is placed on the angled monitor panel in monitor
position. This setting compensates for the amount of low frequency boost created by placing
the speaker close to the floor.
WALL - is used when the loudspeaker is mounted to the wall using a mounting bracket
This setting compensates for the amount of low frequency boost created by placing the
loudspeaker close to the wall. If used on a column, it is recommended to use the SUSPEND
mode.
SUSPEND - is used when the loudspeaker is suspended in a 3-point suspension by eye bolts.
SUB Menu
The Sub menu is used to select a high pass frequency for use with a subwoofer or a matched
subwoofer. Available options for this selection are: OFF, 80Hz, 100Hz, 120Hz, 150Hz, 15"/18".
The high passes are 24dB / octave Linkwitz/Riley crossovers. The 80 Hz, 100 Hz, 120 Hz,
and 150 Hz choices are generic high pass settings for use with other subwoofers. The 15
Sub/18 Sub settings are specifically optimized for subwoofers by including delay for best
summation. The default is OFF.
TREBLE Menu
The Treble menu is used to adjust the high frequency performance of the loudspeaker for
different applications or personal preference. The parameter controls a high shelving filter
centered on 6 kHz. The range is-12 dB to+ 6 dB. The default is zero (0).
MID Menu
The Mid menu is used to adjust the midrange frequency performance of the loudspeaker
for different applications or personal preference. The parameter controls a parametric EQ
centered on 1.2 kHz. The range is -12dB to +6dB. The default is zero (0).
BASS Menu
The Bass menu is used to adjust the low frequency performance of the loudspeaker for
different applications or personal preference. The parameter controls a parametric EQ filter
centered on 80 Hz. The default is zero (0).
7