Beper RI.096 Manual De Instrucciones página 10

Fan heater Use instructions
OPERATION
Put the plug into an appropriate socket.
Turn the function selector to the desired function.
THERMOSTAT
Turn the thermostat knob clockwise to increase the air emission (tem- perature) and to start the
heating or the fan.
The operating lamp lights up.
Turn the knob counterclockwise to decrease the temperature or turn off the heating or fan.
HEATING FUNCTION
Select "I" in the function selector to obtain the minimum heat level (1000 Watts). Select "II" to get the
maximum heat level that can be set (2000 Watts).
Turn clockwise the thermostat knob to adjust the heat.
To reach the maximum heating level, select "II" and turn the thermostat knob clockwise.
VENTILATION FUNCTION
Place the function selector on
The Fan heater will emit fresh air.
Adjust the thermostat clockwise until the fan starts; The operating lamp lights up.
To switch off, position the function selector to the "0" position and rotate the thermostat counter-
clockwise; The operating lamp switches off.
Use the handle to carry or move the fan heater.
MAINTENANCE AND CLEANING
There are no maintenance items inside the stove.
THECNICAL DATA
Power: 2000W
Power supply: 220-240V~ 50/60 Hz
For any improvement reasons, Beper reserves the right to modify or improve the product
without any notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE),
requires that old household electrical appliances must not be disposed of in the normal
unsorted municipal waste stream. Old appliances must be collected separately in order to
optimize the recovery and recycling of the materials they contain, and reduce the impact on
human health and the environment. The crossed out "wheeled bin" symbol on the product
reminds you of your obligation, that when you dispose of the appliance, it must be separa-
tely collected.
(ventilation only).
10