Proline FP450 Instrucciones De Operación página 7

5. Place the bowl cover on the bowl, then grasp the feed tube and turn the cover to clockwise until it locks
into place.
6. Fit the food pusher into the feed tube.
7. Plug the appliance into the mains socket.
OPERATION
WARNING: DO NOT OPERATE THE APPLIANCE WITHOUT BOWL COVER LOCKED.
Please follow processing guides provided in the instruction manual to operate the appliance.
When the motor gets blocked during processing, the appliance may emit some smoke.
This phenomenon is normal.
In that case, please stop the appliance by turning the control knob to the 0 position and let the appliance
cool down before further use.
Turning on and o the food processor
To turn on the appliance, turn the control knob to the desired speed position – 1 for low speed and 2 for
high speed. The appliance will operate continuously.
To stop the appliance, turn the control knob to the 0 position.
Wait until the blade comes to a complete stop before removing the cover or bowl.
Using the pulse control
The pulse control allows precise control of the duration and frequency of processing.
To use the pulse control, turn the control knob to the P position and hold it. Release the control knob to stop.
Using the food pusher
Use the food pusher to push ingredients through the feed tube on the bowl cover. You can also use the
pusher to seal o the feed tube while the appliance is operating to prevent dust from entering or
foods/liquids from escaping.
Using the slicing/ grating blade
It is recommended to use the desired blade for processing fruits, vegetables, cheeses, meat and so on.
First install the desired blade onto the insert medium and then place the insert medium over the driving
shaft.
Processing guide
INGREDIENT
Potato
Carrot
Cut large chunks of food to t the size of the feed tube.
For best processing results, ll the feed tube evenly.
Press down the ingredients slowly and steadily with the pusher.
When processing large quantities, process small batches at a time and empty the bowl
between batches.
Caution: Blades are very sharp. Use care when handling.
MAX QUANTITY
400g
500g
MAX OPERATING TIME
SLICING GRATING
50 seconds 30 seconds
50 seconds 30 seconds
4