Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
4. Move the switch to the ON position. Make a loud
sound (clap) to activate the item.
Turn the switch to the OFF position when not in use.
OPTIONAL DEMO SET UP
OPTIONAL DEMO SET UP
FOOTPAD/PUSH BUTTON IS NOT INCLUDED. MUST BE PURCHASED SEPARATELY.
1. Insert the cable from optional footpad/push button into the
jack labeled TRY ME on the CONTROL BOX.
2. Place the switch in the TRY ME position to enable
TRY ME activation.
3. Step on the FOOTPAD or press push button to activate the
scary sequence!
*
Footpads and push buttons are sold separately and can be
purchased at www.tekkyaccessories.com
CARE AND MAINTENANCE
• STORE IN A COOL AND DRY ENVIRONMENT.
• IN INCLEMENT WEATHER BRING ITEM INDOORS.
• SURFACE WASHABLE ONLY. DO NOT USE ANY HARSH OR ABRASIVE CLEANING AGENTS.
• REMOVE BATTERIES WHEN STORING ITEM FOR LONG PERIODS OF TIME.
TROUBLESHOOTING
PROBLEM
Item will not
activate.
Item is not swinging.
Item swinging has
slowed down.
POSSIBLE CAUSE
• Switch on control box is not in the ON position.
• Batteries are not inserted correctly.
• Hook and loop fastener is loose.
• Battery power is low.
4
Page 4
CORRECTIVE ACTION
• Move switch to ON position.
• Install batteries with positive and
negative terminals in the
correct positions.
• Pull the hook and loop fastener tight
over the mounting object.
• Replace old batteries with 4 fresh AA
alkaline batteries.
Publicidad
