Braun Multiquick MR 6500 M Manual Del Usuario página 8

English
Our products are engineered to meet the highest
standards of quality, functionality and design.
We hope you thoroughly enjoy your new Braun
appliance.
Caution
Please read the use instructions carefully and
completely before using the appliance.
• The blades are very sharp! To avoid injuries,
please handle blades with utmost care.
• Always unplug the appliance when it is left un-
attended and before assembling, disassembling,
cleaning and storing.
• This appliance is not intended for use by children
or persons with reduced physical or mental
capabilities, unless they are given supervision by a
person responsible for their safety. In general, we
recommend that you keep the appliance out of
reach of children.
• Do not hold the motor part
box under running water, nor immerse them in
H
water.
• Braun electric appliances meet applicable safety
standards. Repairs or the replacement of the
mains cord must only be done by authorised
service personnel. Faulty, unqualified repair work
may cause considerable hazards to the user.
• Before plugging into a socket, check whether your
voltage corresponds to the voltage printed on the
bottom of the appliance.
• The appliance is constructed to process normal
household quantities.
• Neither the beaker
microwave-proof.
Description
Motor part
A
On/off switch for variable speed
B
Turbo switch
C
Buttons for releasing the working parts
D
Variable speed regulator
E
Blender shaft
F
Measuring beaker
G
Whisk gear box
H
Whisk
I
Chopper
J
Setting the speed
When activating switch
corresponds to the setting of variable speed regulator
. The higher the setting, the faster the chopping
E
results.
However, maximum processing speed can only be
achieved by pressing the turbo switch
nor the whisk gear
A
, nor the chopper bowl (c) is
G
, the processing speed
B
. You may
C
also use the turbo switch for instant powerful pulses
without having to manipulate the speed regulator.
Depending on the application, we recommend the
following speed settings:
Handblender 1...turbo
Chopper 1...turbo
Whisk 1...15
How to operate your handblender
The handblender is perfectly suited for preparing
dips, sauces, soups, mayonnaise and baby food as
well as for mixing drinks and milkshakes.
1. Insert the motor part
until it locks.
2. Introduce the handblender in the vessel, then
press the on/off switch
3. To release the blender shaft after use, press
buttons and pull it off.
D
You can operate the handblender in the measuring
beaker , and just as well in any other vessel. When
G
blending directly in the saucepan while cooking,
take the pan from the stove first to protect your
handblender from overheating.
How to operate your whisk
Use the whisk only for whipping cream, beating egg
whites and mixing sponges and ready-mix desserts.
1. Insert the whisk
I
insert the motor part
locks.
2. Place the whisk in a vessel and only then, press
switch to operate it.
B
3. To release, press buttons
box. Then pull the whisk out of the gear box.
For best results:
• Do not use the beaker
• Move the whisk clockwise, holding it slightly
inclined.
Whipped cream
Only whip up to 400 ml chilled cream
(min. 30 % fat content, 4 – 8 °C).
Start with a low speed setting (1) and while whipping,
increase the speed to setting 15.
Egg snow
Only whip up to 4 egg whites.
Start with a medium speed setting (7) and while
beating, increase the speed to setting 15.
into the blender shaft
A
or the turbo switch
B
into the whisk gear box
into the gear box until it
A
and pull off the gear
D
, but a wider bowl.
G
F
.
C
, then
H
9