Publicidad
Safety, performance, and dependability have been given
top priority in the design of your multi-tool.
INTENDED USE
The multi-tool is intended to be used only by adults who
have read and understood the instructions and warnings
in this manual and can be considered responsible for their
actions.
The multi-tool is intended to be used:
–
for sanding and finishing metal, wood, plastic, or
similar materials using the sanding pad with the
shaped abrasive sheets provided
–
for scraping and plunge-cutting into non-ferrous
metal, wood, plastic, plasterboard, etc. using the
provided metallic cutting blades
–
for cutting holes in walls to accommodate switches
or power sockets
–
for removing grouting from between ceramic tiles
The multi-tool is intended to be operated indoors in dry, well
illuminated and adequately ventilated conditions.
The multi-tool is not intended to be used on wet materials
or surfaces.
Do not use the product for any other purpose. Use of the
product for operations different from intended could result
in a hazardous situation.
WARNING
Read all safety warnings, instructions, illustrations
and specifications provided with this power tool.
Failure to follow all instructions listed below may result in
Save all warnings and instructions for future reference.
MULTI-TOOL SAFETY WARNINGS
Hold the power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring. Cutting
accessory contacting a "live" wire may make exposed
metal parts of the power tool "live" and could give the
operator an electric shock.
Always wear safety goggles while operating the tool.
Wear a dust mask when dust is produced.
WARNING
Dust from certain paints, coatings, and materials may
cause irritation or allergic reactions. Dust from wood
such as oak, beech, MDF, and others are carcinogenic.
product on materials containing asbestos.
WARNING
The product should never be connected to a power
cleaning, performing maintenance, or when the product
is not in use. Disconnecting the product from the power
supply will prevent accidental starting that could cause
When working in walls, ceilings or floors, take care to
avoid electric cables and gas or water pipes.
WARNING
Metallic accessories will become hot during use and
could result in skin burns if contacted by the operator.
Wear gloves when changing accessories.
Take care when setting down the tool between
Do not use cutting accessories which are damaged,
cracked or do not fit securely to the product.
The multi-tool creates vibrations which move the
accessory. The vibrations may cause discomfort if the
product is operated for long periods of time. Take a rest
often, especially if you feel discomfort in the arm, wrist,
or fingers. Choose a speed setting which will get the
work completed efficiently. Read the Residual Risks
and Risk Reduction sections for more information on
Clamp
workpiece
with
damage. Do not hold the material you are sanding by
hand.
Do not use sanding paper larger than needed. Extra
paper extending beyond the sanding pad can also
cause serious lacerations.
Do not machine any materials that present a danger to
health (e.g. asbestos).
The dust produced when using this tool may be harmful
to the health of the operator and bystanders. Operator
and bystanders shall not touch and not inhale the dust.
Wear a suitable dust protection mask.
RESIDUAL RISKS
Even when the product is used as prescribed, it is still
impossible to completely eliminate certain residual risk
factors. The following hazards may arise and the operator
should pay special attention to avoid the following:
–
Using the product will produce considerable amount
of dust and fine particles. Use the dust collection
device or connect a dust extraction vacuum when
operating the product. Wear dust masks containing
filters appropriate to the materials being worked
on. Ensure adequate workplace ventilation. Do not
eat, drink, or smoke in the work area. Only operate
EN
English
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
EL
a
clamping
device.
1
Publicidad
