Bimar skiumi WKM60.EU Folleto De Instrucciones página 10

Fax +32 030 9904733

1. Always remove the jug from the base (E) before you insert or remove the hose (B) on the bottom,
fill the container or before any other operation.
2. Pour the milk into the container (C) of the device, you can check the levels max and min marked
inside the container.
3. Position the cover (A) on the container.
4. Insert the plug in the socket, place the container on the base and turn the unit via the button (D),
selecting the desired function.
5. After a few minutes the device switches off automatically when the milk is warm and mounted
(about 68 ° C) or when the milk is mounted at room temperature. You can break the cycle operation,
pressing the button again.
6. Attention: Hot milk can cause serious burns. Be careful when the kettle contains hot milk.
7. After use, remove the plug from the socket and leaving the appliance to cool completely before
cleaning it.
Never leave the appliance connected to the socket if it is not in use, especially for long periods.
CLEANING AND MAINTENANCE
Attention: before cleaning the appliance, switch it off, remove the plug from the current socket and
leave it until getting cool. The milk container, cover and whip need a thorough cleaning and frequent,
this prevents odors. E 'need to clean the unit after each use.
• Never immerse the appliance (base+kettle) in water or any other liquid.
• To clean the support base use only a soft cloth slightly damp. Before you use it make sure it is
completely dry, especially the contacts.
• Remove the hose from the container, rinse the hose with warm water and a normal dishwashing
detergent, rinse and dry.
• Wash the jug and cover with hot water and a normal dishwashing detergent, rinse and dry. Do not
use powders, abrasives, or steel wool. Before you use it make sure it is completely dry, especially
the contacts.
• If you decide not to use the appliance any more, we recommend making it inoperative by cutting
the power cord (after making sure you have disconnected the plug from the socket) and make
dangerous parts harmless if children are allowed to play with them.
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN
ACCORDANCE WITH EC DIRECTIVE 2011/65/EC
At the end of its working life, the product must not be disposed of as urban waste. It must be taken to
a special local authority differentiated waste collection centre or to a dealer providing this service.
Disposing of a household appliance separately avoids possible negative consequences for the
environment and health deriving from inappropriate disposal and enables the constituent materials to
be recovered to obtain significant savings in energy and resources. As a reminder of the need to
dispose of household appliances separately, the product is marked with a crossed-out wheeled
dustbin.
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Bimar
(Italy). The pages must be reproduced and folded in
order to obtain a booklet A5 (+/- 148.5 mm width x 210
mm height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't
change the page numbering. Keep the language
integrity.
10/28
Assembly page 10/28