Publicidad
Idiomas disponibles
Idiomas disponibles
EN
MAINTENANCE
PRECAUTIONS
•
Before dismantling or repairing the blade or more generally to the maintenance of your machine, you
should cut the engine and disconnect the power cord.
•
Be careful not to cut yourself, use leather protective gloves to keep the blades.
•
Use only parts recommended by Voltr / Alice's Garden.
•
Do not use a high pressure device to clean the logging.
•
This shift is equipped with a specially treated statement area. After a long period of use it may be that
the guide surface is covered with material. Carefully remove the material with an appropriate cloth.
Then oil the machined surface.
•
Do not use chemical, alkaline or abrasive substances, or detergents or disinfectants caustic, this could
damage the surfaces of the device.
MAINTENANCE AND STORAGE
•
Before any maintenance operation, cut the engine and disconnect the power cord.
•
Leave the engine to cool before storing the logging.
•
Perform all oil emptying operations outside the premises and when the engine is cold.
•
Use only parts recommended by Voltr / Alice's Garden.
•
Wear appropriate clothes and gloves to avoid injuring themselves during cleaning and maintenance
operations of the logging.
CLEANING
WARNING : During maintenance and cleaning, make sure the machine is disconnected.
•
When the device is stopped for maintenance, repairs or storage, or to change an accessory, cut the
engine, disconnect the plug of the sector, make sure that all mobile parts are completely stopped.
Let the device cool before making checks or settings.
•
Always wait for the device to have cooled before storing it.
•
Regularly check that the power supply and an extension have not suffered any damage or signs of
wear. Do not use the device if the cords are damaged.
•
When maintaining cutting blades, be aware that, even if the engine does not work,
•
The blades can still move.
•
Maintain your garden tool and hold it clean. Do not let the material dry and harden on the surfaces
of the logging. This directly affects its proper functioning.
•
Check the garden tool and, for safety reasons, replace worn or damaged parts.
•
Make sure all screws are tight and blocked.
•
Never try to operate manually.
•
Remove all the deposits from the machine using a brush.
•
Always clean the machine after use. Clean the plastic body and the plastic parts with soap and a
damp cloth. Do not use aggressive products or solvents for cleaning.
•
Never clean the logging with a jet of water. Make sure you don't put water in the logging.
•
Use only the recommended accessories for this logging.
22
21/11/2022
Publicidad
