Hailo ProfiStep Duo Aluminium Instrucciones De Uso Y Manejo página 15

4. Scope of delivery
1 x Rope-pull single ladder
1 x Crossbar
2 x M6 screw
2 x Hexagon nut M6
2 x Spacer sleeve
1 x Use and operating instructions
Check that the contents are complete and check for any possible
transport damage before use. Remove the packaging material.
WARNING
Risk of suffocation!
Packaging material is not a children's toy; there is a risk
of suffocation if not handled properly.
5. Instructions for assembly
Before using the rope-pull single ladder, the crossbar must be
mounted on the front stand [A-1].
1. Preparing the rope-pull single ladder.
Position the rope-pull single ladder so that the crossbar
[C] is initially removed and can be mounted to the front
stand [A-1].
(For adjustment and locking of the rope-pull single ladder,
see Chapter 6. Assembly/operation).
A Phillips screwdriver and a size 10 wrench are required.
2. Installing the crossbeam:
Insert spacer sleeves [C-1] into both holes of the oval
tube and insert the crossbeam [C] into the recess of the
stand [A-1].
Screw the crossbeam tight on both stringers.
WARNING
Danger of severe injuries!
The rope-pull singe ladder may only be used when the
crossbar is installed.
1.
2.
GB
15